Activated bentonite

Product introduction

The HT series activated clay produced by the company is made of magnesium-rich bentonite rich in magnesium and is refined by acidification process. It has a large specific surface area and a large activated acid center. Therefore, it has strong adsorption and catalytic ability. It is widely used in industry for decolorization and refining of various vegetable oils, animal oils and cosmetic raw materials, refining of mineral oils and recycling of waste oils. It can be used for sewage treatment and toxic gases. Filtration and catalytic cracking in the petroleum industry.

Technical indicators

Table1.Sensory requirements
ItemRequirementTest method
ColorWhite 、gray or light pinkTake moderate amount of samples in 50mL beaker and observe color and texture under natural light.
Shapepowder
Table2. Physicochemical indexes
NO.ItemsTest items of GB25571-2011Product model
HT-1AHT-1HT-2AHT-2
1Decolorization rate (capacity),% (oil industry requirements)——155150120100
2Free acidity(measured in H2SO4),W/%≤0.300.20 0.30 0.20 0.30 
3Water content,W/%≤12.010.0 12.0 10.0 12.0 
4Fineness（pass0.075mmtest sieve），W/%≥9090909090
5Activity degree,mmoj/kg(oil industry requirements)——————————
6Specific surface area，㎡/g≥130　　　　
7Filtration speed，80ml/minPass the test　　　　
8Bulk density，g/m10.55±0.10　　　　
9pH（50g/L suspension liquid）2.2～4.8　　　　
10Heavy metal（ Pb ）/（mg/kg）≤40　　　　　
11Arsenic（As）/（mg/kg）≤3　　　　
Notes1.If the decolorization rate in item1greater than or equal to≥80%，and the change of neutralization oil fails to reach the standard, the decolorization force shall be greater than or equal to≥95%with the standard white soil provided by the supplier as the receiving basis.
                       2.Indicators6-11are based on the data of the actual test results of the national inorganic salt product quality supervision and inspection center”（meeting the requirements of gb25571-2011）
                       3.If the user has special requirements, it can be determined through negotiation.